How to store a plastic glass making machine when not in use?

Jun 19, 2025

Leave a message

John Zhang
John Zhang
As the Technical Director of Pingyang Sinoplast Machinery, I specialize in the research and development of plastic sheet extrusion lines. With over 15 years of experience in the plastics industry, I am passionate about creating innovative solutions for our clients worldwide.

As a supplier of Plastic Glass Making Machines, I understand the importance of proper storage when these machines are not in use. A well - stored machine not only extends its lifespan but also ensures it remains in optimal working condition for the next production run. In this blog, I'll share some professional advice on how to store a plastic glass making machine effectively.

Pre - storage Preparation

Before storing the plastic glass making machine, a series of thorough preparations are necessary. First and foremost, conduct a comprehensive cleaning of the machine. Use appropriate cleaning agents to remove any plastic residues, dust, and lubricants on the machine's surface. Pay special attention to the mold parts, as they are the key components for shaping plastic glasses. Residues left in the molds can harden over time, causing damage to the mold surface and affecting the quality of future products.

Dismantle the easily removable parts of the machine, such as cutting tools, heating elements, and control panels. These parts are often more delicate and prone to damage during storage. By removing them, you can store them separately in a more controlled environment. For example, the cutting tools should be cleaned and then coated with a thin layer of anti - rust oil to prevent corrosion.

Inspect the entire machine for any signs of wear or damage. Check the electrical wiring for any frayed or exposed parts. Loose electrical connections can pose a safety hazard during storage and may also cause malfunctions when the machine is restarted. If any issues are found, repair them immediately. This not only ensures the machine's safety during storage but also saves time and cost when it comes to putting the machine back into operation.

Storage Environment

The storage environment plays a crucial role in maintaining the machine's condition. Choose a storage location that is dry, clean, and well - ventilated. High humidity can lead to rusting of metal parts and damage to electrical components. A humidity level of around 40% - 60% is ideal. You can use dehumidifiers in the storage area to control the humidity if necessary.

The temperature of the storage area should also be stable. Extreme temperatures can cause expansion and contraction of machine parts, leading to mechanical stress and potential damage. A temperature range of 10°C - 30°C is recommended. Avoid storing the machine in areas that are exposed to direct sunlight, as prolonged exposure can cause discoloration and degradation of plastic and rubber parts.

Protect the machine from dust and dirt. You can cover the machine with a dust - proof cover made of thick, breathable fabric. This cover should fit the machine snugly to prevent dust from entering. Additionally, the storage area should be kept clean. Regularly sweep and mop the floor to reduce the amount of dust in the air.

Storage of Components

When storing the disassembled components, keep them organized. Label each part clearly to ensure easy reassembly later. Store small parts such as screws, nuts, and washers in sealed plastic containers. This not only prevents them from getting lost but also protects them from dust and moisture.

For larger components like the mold, store them in a dedicated mold rack. The rack should be sturdy and level to prevent the molds from warping. If possible, wrap the molds in anti - static plastic film to protect them from static electricity, which can attract dust.

The electrical components, such as motors and control panels, should be stored in a separate, insulated area. These components are sensitive to electrical interference and moisture. You can place them in plastic crates lined with anti - static foam to provide additional protection.

2Plastic Ice-cream Cup Thermoforming Machine

Maintenance During Storage

Even during storage, the machine still requires some level of maintenance. Periodically check the machine and its components. Every few months, inspect the anti - rust coatings on metal parts. If the coating has worn off in some areas, re - apply it.

Check the tightness of the bolts and nuts on the machine frame. Vibration during transportation or minor shifts in the storage area can cause these fasteners to loosen. Tighten them if necessary to ensure the machine's structural integrity.

For the electrical system, test the insulation resistance every six months. This helps to detect any potential electrical problems early. If the insulation resistance is lower than the recommended value, investigate the cause and take appropriate measures to fix it.

Reactivation of the Machine

When it's time to put the plastic glass making machine back into operation, a series of steps are required. First, thoroughly clean the machine again to remove any dust or debris that may have accumulated during storage. Reassemble all the components according to the labels and the machine's assembly manual.

Check the lubrication of the moving parts. Add fresh lubricant to the bearings, gears, and other moving components as specified in the machine's maintenance guide. This ensures smooth operation and reduces wear and tear.

Conduct a comprehensive electrical check. Inspect the wiring for any signs of damage that may have occurred during storage. Test all the electrical functions of the machine, including the heating system, control panel, and motors.

Before starting full - scale production, run a test operation. Produce a small batch of plastic glasses to check the machine's performance. Adjust the settings as needed to ensure the quality of the products meets the required standards.

As a supplier of Plastic Glass Making Machines, we offer a wide range of high - quality machines, including the Plastic Cup Plate Making Machine, Disposable Glass Manufacturing Machine, and Disposable Cup Machine. If you are interested in purchasing our machines or have any questions about machine storage and maintenance, please feel free to contact us for further discussion. We are committed to providing you with the best products and services to meet your production needs.

References

  • Manufacturer's Manual for Plastic Glass Making Machines
  • Industrial Machinery Storage Guidelines
  • Electrical and Mechanical Maintenance Handbooks
Send Inquiry