1. Key Points of Mold Design
Product Size and Precision: When designing a mold, the size of the mold must be accurately calculated according to the size requirements of the target product. Since PP plastics will shrink during the thermoforming process, a certain amount of shrinkage margin must be reserved for the mold size. Usually, the shrinkage rate of PP plastics ranges between 1.0% and 2.5%. The specific value needs to be determined by referring to the data provided by the material supplier. At the same time, for products with high precision requirements, the manufacturing tolerance of the mold must be strictly controlled to ensure that the size of the product after molding meets the standard.
Mold Release Design: Reasonable mold release design can ensure that the product is smoothly removed from the mold to avoid damage. Common mold release methods include mechanical demolding and pneumatic demolding. The mold demolding angle should be considered during design. Generally, the mold release angle is between 3° and 10°. Too small an angle will make demolding difficult, and too large an angle may affect the appearance of the product. In addition, the mold surface can be polished to reduce the surface roughness, decrease the friction between the product and the mold, and facilitate demolding.
Cooling System Design: PP plastics need to be quickly cooled and solidified after thermoforming. A good cooling system can improve production efficiency and product quality. The cooling system usually adopts the design of a cooling water channel, which ensures that the cooling water flows evenly in the channel so that the temperature of each part of the mold is consistent. The layout of the channel should be optimized according to the product shape and mold structure. For products with complex shapes, additional cooling circuits can be added to avoid deformation of the product due to insufficient local cooling.
Exhaust Design: During the hot forming process, if the air in the mold cannot be discharged in time, bubbles, depressions, and other defects will form on the surface of the product. Therefore, the mold needs to have a reasonable exhaust structure, such as an exhaust groove opened on the mold parting surface. The depth of the exhaust groove is generally 0.02 - 0.05 mm, and the width depends on the size of the mold. At the same time, micropores can be machined on the surface of the mold cavity for exhaust to ensure that the air can be discharged smoothly.

2. Key Points of Mold Manufacturing
Material Selection: The performance of the mold material directly affects the service life of the mold and the quality of the molded product. Commonly used mold materials include alloy steel and aluminum alloy. Alloy steel has high strength and wear resistance and is suitable for molds with large production batches and high precision requirements. Aluminum alloy has good thermal conductivity, can speed up cooling, improve production efficiency, and is often used for molds with high cooling requirements. When selecting materials, factors such as product production requirements and mold use frequency should be considered comprehensively.
Processing Technology: The processing accuracy of the mold depends on advanced processing technology. The use of CNC machining centers for milling, drilling, and other processing can ensure the high precision of the mold size and surface quality. For molds with complex shapes, special processing technologies such as EDM and wire cutting can be used. During the processing, the processing accuracy must be strictly controlled, and the key dimensions must be measured and calibrated multiple times to ensure that the mold meets the design requirements.
Surface Treatment: The surface treatment of the mold can improve the wear resistance, corrosion resistance, and demolding performance of the mold. Common surface treatment methods include chrome plating and nitriding. Chrome plating can increase the hardness and smoothness of the mold surface and facilitate demolding. Nitriding can improve the wear resistance and corrosion resistance of the mold surface and extend the service life of the mold.
3. The Impact of Different Molds on the Molding Effect
Differences in Mold Structure: Molds with different structures, such as single-cavity molds and multi-cavity molds, have different effects on the molding effect. Single-cavity molds have low production efficiency but high product quality stability and are suitable for small-batch production or new product trial production. Multi-cavity molds can mold multiple products at the same time, with high production efficiency, but mold design and manufacturing are difficult, and the consistency requirements between cavities are high. Otherwise, it will lead to differences in product size and quality.
Influence of Mold Material: The thermal conductivity of the mold material will affect the cooling speed of PP plastic. Molds with good thermal conductivity, such as aluminum alloy molds, can quickly cool and shape plastics, reducing the possibility of product deformation. While molds with poor thermal conductivity have slow plastic cooling, which may cause uneven shrinkage of products, warping, deformation, and other defects. In addition, the hardness and wear resistance of the mold material will also affect the service life of the mold. Molds with low hardness are prone to wear, resulting in reduced product dimensional accuracy.
Mold Surface Quality: The surface roughness of the mold directly affects the appearance quality of the product. Molds with rough surfaces will have obvious scratches, pits, and other defects on the surface of the molded product. While molds that have been finely polished can produce products with smooth and beautiful surfaces. At the same time, the demolding performance of the mold surface is also related to the surface quality. Good surface quality can reduce the adhesion between the product and the mold and facilitate demolding.
