When producing disposable plastic cups, meeting environmental requirements requires systematic implementation across four core areas: equipment selection, process optimization, pollution control, and resource recycling. Specific technical approaches and management measures are as follows:
1. Equipment Selection: Adopting Low-Pollution, High-Efficiency Manufacturing Technologies
Environmental Upgrades for Thermoforming and Cup-Making Machines
Biodegradable cup-making machines from brands such as GtmSmart are selected. These utilize heat and vacuum adsorption molding technology to ensure that bio-based materials like PLA are processed without generating harmful substances. Furthermore, the precision of the equipment ensures consistent product dimensions and reduces raw material waste. For example, at 220°C, the chemical bonds in plastic molecules are stable, resulting in no thermal decomposition emissions and only the volatilization of trace free components (measured as non-methane total hydrocarbons). Emissions can be achieved by combining adsorption concentration with RCO catalytic combustion equipment. Energy-saving Design of Auxiliary Equipment
A multi-stage indirect water cooling system is configured, with cooling water recycled through the cooling tower and not discharged. Low-noise equipment (such as screw conveyors and calenders) is selected, and plant boundary noise levels comply with the "Environmental Noise Emission Standard for Industrial Enterprises" (GB12348-2008) through sound insulation and foundation vibration reduction measures.
II. Process Optimization: Reducing Pollution Emissions and Resource Consumption
Raw Material Selection and Formula Innovation
Bio-based Material Substitution: Prioritize the use of biodegradable resins such as PLA (polylactic acid) and PBAT (polybutylene adipate/terephthalate), or add natural fiber reinforcements such as straw powder and bamboo powder to reduce the use of petroleum-based plastics. For example, a patented technology combines polypropylene, soy protein, and modified starch to develop environmentally friendly, biodegradable plastic cups, with over 60% of the raw materials coming from renewable resources.
Low-Volatile Additives: Select solvents and adhesives that comply with GB9685 standards, avoiding additives containing harmful substances such as benzene and toluene to reduce VOC emissions during production. Clean Production Process Design
Enclosed Production: Sealed connections are used between equipment such as agitators, mixers, and plasticizers to prevent dust leakage. Local exhaust systems are installed to collect and treat waste gases generated by injection molding and blow molding processes.
Scrap Recycling: Rejected products and scraps are crushed in a crusher and reused in production, increasing raw material utilization to over 98%. For example, one project reduced plastic waste emissions by approximately 20 tons annually through this process.

III. Pollution Control: Full-Process Emission Management
Waste Gas Treatment
Injection/blow molding waste gas: A combined bag filter and activated carbon adsorption process is used, achieving a treatment efficiency of over 90%, with emission concentrations meeting the "Synthetic Resin Industry Pollutant Emission Standard" (GB31572-2015).
Printing Waste Gas: If ink printing is involved, a gas collection and treatment device must be installed. After adsorption concentration and RCO catalytic combustion, the gas is discharged to the atmosphere to ensure a non-methane total hydrocarbon concentration of ≤60 mg/m³. Wastewater Treatment
Domestic sewage: After pre-treatment in septic tanks, it is fed into the municipal sewage network and complies with the Level III standard of the Integrated Wastewater Discharge Standard (GB8978-1996).
Production wastewater: Cooling water is recycled and not discharged. Equipment cleaning wastewater is treated through sedimentation and filtration before reuse, reducing fresh water consumption.
Solid Waste Disposal
Hazardous waste: Waste activated carbon, waste ink barrels, and other waste are disposed of by qualified organizations. Storage sites comply with the Hazardous Waste Storage Pollution Control Standard (GB18597-2001).
General industrial solid waste: Used raw material packaging bags, dust removal ash, and other waste are collected and sold for comprehensive utilization. Domestic waste is collected and transported by the sanitation department.
IV. Resource Recycling: Building a Closed-Loop Production System
Energy Management
Replacing coal with clean energy such as natural gas reduces SO₂ and NOx emissions. Waste heat from the pelletizer and calender is used to preheat raw materials through waste heat recovery, reducing energy consumption by approximately 15%. Product Recycling and Degradation
Degradable Plastic Cups: Ensure that products comply with "GB/T 18006.3-2020 General Technical Requirements for Disposable Degradable Tableware" and achieve a decomposition rate of ≥ 90% within 180 days under industrial composting conditions.
Recycling Marking and Responsibility: Mark products with a recycling mark approved by the provincial environmental protection department, establish a recycling system, and meet the recycling targets set by the municipal environmental protection department.
V. Compliance Management: Ensure compliance with environmental regulations throughout the entire process.
Environmental Impact Assessment and Acceptance
Projects must prepare an "Environmental Impact Statement for Construction Projects" and clearly define total pollutant emission control targets (e.g., CODcr ≤ 0.012 tons/year, VOCs ≤ 0.023 tons/year). Production may commence only after passing environmental protection department acceptance.
Daily Supervision
Establish environmental regulations and systems, appoint dedicated environmental management personnel, and regularly inspect and maintain equipment operations and pollution control facilities.
Install an online monitoring system to monitor waste gas and wastewater emissions in real time, and upload the data to the environmental protection department's monitoring platform.
