Sinoplast PP/PS Plastic Sheet Extruder Has Been Debugged And Is Ready To Be Sent To The Customer's Factory

Sinoplast PP/PS plastic sheet extruder has been debugged and is ready to be sent to the customer's factory

On September 10, 2024, the PP/PS sheet extruder that the customer had previously ordered from our company has been produced and our engineers have started testing it and it can be put into normal production.

The equipment is equipped with a 130 diameter screw JC-Time screen changer and die head, with a production capacity of up to 400-500kg/h. After the machine is loaded into the container, it will be transported to the customer's factory by sea. After it arrives at the customer's factory, our company will send an engineer to the customer's factory for installation and debugging, as well as to guide the customer's machine operation and subsequent maintenance.

Equipment Introduction:

Sinoplast PP/PS sheet extruder is a series of extruders designed for high plasticization requirements, uniform mixing, and high-quality sheets, suitable for various production needs. All machine accessories are sourced from well-known domestic and foreign brands, ensuring high efficiency and stability throughout the entire production process

Characteristics of Sinoplast plastic sheet extruder:
1. The production line design is reasonable, durable, and easy to maintain
2. High degree of automation, human-machine interface, easy to understand and operate
3. Screw optimization design, good plasticizing mixing effect, high output
4. The extruder can achieve continuous production without stopping the machine
5. The inner liner of the rolling roller adopts a spiral groove design, which has good cooling effect and strong rigidity
6. The rolling roller adopts an independent temperature control system, which meets various process requirements

 PP/PS Single Layer Sheet Extruder Technical Parameter:

PP/PS Double Layer Sheet Extruder Technical Parameter :